- Products List
- Electro Galvanized Steel Wire
- Galvanized Wire Enquiry
- Hot Dip Galvanized Coating Steel Wire
- Galvanized plasting coated wire mesh
- Electro Galvanized Wire
- Hot Dipped Galvanized wire
- Galvanized Tie wire
- Annealed wire
- Black Iron wire
- Stainless Steel wire
- PVC Coated wire
- U Type wire
- Glvanized Welded Wire Mesh
- Glvanized Chain Link Fence
- Glvanized Crimped Wire Mesh
» |
» |
Galvanized Wire Enquiry |
Galvanized Wire Enquiry
We like to refer our previous mail and in addition we are given below the different inquiry as per below :
1. Galvanized Steel Wire for Armoring.
Thickness : 3.15 mm
Weight of Zinc Coating minimum: 240 g/M², Elongation minimum: 10 %, Tensile Strength minimum: 300 max. 500 N/mm².
Quantity require : 15 Mt
2. Galvanized Steel strip
Width: 4 mm X thickness: 0.8 mm)
Quantity require - 07 Mt
Galvanized Helical Steel tap
Width: 25.4 mm X thickness: 0.4 mm)
Quantity require - 03 MT
Measurement of Roll: Boring (Inner dia)= 60.0 m.m & Outer dia = 508 m.m
3. Cold Rolled Galvanized Steel Strips
Description of materials –Galvanized. CRCA Strips, Grade -D
Width : 16 mm X thickness 0.80 mm, Hardness : 56, Yield Strength : 258, Zinc coating 136
Tested to specification No. IS-277
Size: 16 mm× 0.80mm ( G.I. Steel Tape 16 mm X 0.80 mm)
Quantity : 40 Mt
4. Galvanized Iron Sheet Side & Bottom for G.I. Box
Width of roll=1219mm, Thickness of Sheet 0.45mm-0.50mm
Weight of roll : 3 Mt, Spec. No. YB 180063/Equivalent
Thickness of zinc Coating: not less than .015-0.020mm each side
Quantity : 40 Mt
(1） Commodity: Hot Dipped Galvanized Steel armour Wire
(2) Nominal Outside Diameter: 0.2 and 0.3 mm
(3) Tonnage: 25MT/month for each diameter
(4) Manufacturing Standard: ASTM A-411
(5) Weight of zinc coating shall be 50g/m2 as per ASTM A-90
(6) Wire shall have tensile strength of 350-483 N/mm2 and minimum elongation of 10% as ASTM E-8
(7) Wire shall pass zinc Adherence coating test of ASTM A-411
(8) Packing: Strong wooden reels or coil wrapped with tar-crepe paper and fasten with strips for export purpose.
The spindle hole on flanges should be equipped with reel reinforcing steel plate. Each plate shall be fixed to the flanges with a minimum of four bolts.
We require your best and best and net offer only to C&F Chittagong, Bangladesh by sea basis and also please offer us to C&F Benapole, Bangladesh by road basis.
